For IEC , the – VAC mains plug, see NEMA connector § NEMA 5. For IEC , the extra low voltage connectors, see DC connector § IEC IEC plug. IEC is an international standard designed “to provide a standard for a safe, compact. GOST IEC IEC system of plugs and socket-outlets for household and similar purposes. Part 2. Plugs and socket-outlets 15 A V a.c. and 20 A V . Find the most up-to-date version of IEC at Engineering
|Genre:||Health and Food|
|Published (Last):||22 November 2010|
|PDF File Size:||4.52 Mb|
|ePub File Size:||9.1 Mb|
|Price:||Free* [*Free Regsitration Required]|
Discovering Electricity Was Easier”. IEC plugs are similar in size and shape to the Europlugwith the front profile being a flat hexagon. There are a number of non-compliance issues with IEC The two types share several characteristics, but Swiss plugs do not fit in IEC sockets v.
Retrieved 13 January Sockets have a 10 mm deep recess.
A label can be inserted to mark the voltage of the local network. NBR defines plugs and sockets for either 10A or 20A. There is no connection for the earthing contact. Plugs and socket-outlets 16 A V a.
Since only plugs with partially sleeved pins are allowed to be distributed in Switzerland in order to minimize the risk of electric shocks. Mains power idc IEC Sockets are required to have shutters for the line and neutral apertures. However, the pins of the Type L 10 A are 4 mm in diameter as in the Europlug and the earth pin is aligned 660906-2 the two others no offset is presentmaking the Italian plug unpolarized.
REFIT found that “the harmonisation of plug and socket outlet systems in Europe, by introducing changes in national wiring legislations would have important transitional periods above 75 years “and that the cost to “replace the old socket-outlets and the corresponding plugs isc the appliances being used ” was estimated at billion Euro, “generating a huge environmental impact, producing some tons of electrical waste”.
An insulating sleeve around the base of the line and neutral pin similar to Europlugs is not compulsory.
South Africa and Brazil are the first countries in the world that have introduced the standard. Details about plug dimensions are given in the table below. The standard was published in 6090-62 ICE List of International Electrotechnical Commission standards. The pins have a diameter of 4. Moreover, the Italian plug is rated for up to 10 amperes although a ampere version exists with different and incompatible size 609062, while the IEC plugs are rated for 13 amperes.
Insulating sleeve around base of L and N pins.
Oh no, there’s been an error
Pins are thicker compared to 10A plugs 4. However, the latter has smaller diameter pins 4. The IEC plugs are smaller than any other European plug with 16 A rating, being only 6096-2 larger than the 2. Distance between line and neutral pin.
IEC – Wikipedia
The IEC is similar to the Italian plug CEI 10 A “Type L”with the same front profile shaped as a flat hexagon and the ie position of the line and neutral pins the centres spaced 19 mm apart. Plugs have partially insulated line and neutral pins. Old and new multi-standard socketRight: